light path
英 [laɪt pɑːθ]
美 [laɪt pæθ]
光路
双语例句
- Using the feedback control technology for reference, a light path of close-loop feedback is done with the pulse laser as control signal.
借鉴反馈控制技术，由脉冲激光控制信号实现光路的闭环反馈。 - The results prove the stability of trap detector and the reasonable improvement of light path.
这些结果证实陷阱探测器稳定性优良，光路改造合理。 - We in detail presented the high accurate measurement of double light path.
着重叙述了高精度双光路测量法。 - Alternatively, calibration may be checked using a Polarization Reference Standard, which consists of a plate of quartz mounted in a holder perpendicular to the light path.
或者，校准可以通过使用一个偏振标准品来进行，该标准品由一片装在垂直于右侧通道的架子上的石英构成。 - An optional black anodized aluminum cover can be used to eliminate ambient light and to block the light path when taking dark current measurements.
另外还提供一个可选配的黑色阳极电镀铝盖用于在进行暗电流测试时遮蔽环境光线。 - The above computer generated simulation image shows how dark matter, shown in red, distorts the light path from and apparent shape of distant galaxies, depicted in blue.
上面这幅计算机仿真所产生的影像，显示这种分布形态的暗物质（红色）如何扭曲来自遥远星系（蓝色）的光。 - In reflective light path, because of the errors in assembling, planar reflector would have three tiny dimensional angles stray.
在折转光路中，由于安装误差，平面反射元件会存在三维方向的微偏角。 - Discussion about Light Path Compensation for Numerical Control Laser Cutting Machine
数控激光切割机光路补偿措施的探讨 - The method of distance measurement based on defocused spots from mono-view is analyzed in theory, and the telecentric light path is used to improve the detection of defocused spots in the system.
在理论上分析了基于弥散斑的单基站定距方法，幷利用远心光路改善弥散斑的测量。 - Therefore, to the big bang model different medium in the light path represents a particle in space and time, this is the life among physicists call "world line" things.
因此，异向介质大爆炸模型中光的路径代表了一个粒子处于空间和时间之中的寿命，这就是物理学家称之为“世界线”的东西。 - Analysis and Improvement of Light Path Calculating Methods for Aspheric Optical System
非球面光学系统光路计算方法的分析与改进 - The arrow indicates the light path. The minimum and maximum girdle diameters are determined by taking a number of diameter measurements.
分光光度计里的箭号，注记的是光束的路径。最低纲领与最高束腰直径决意采取了若干直径测量。 - Secondly, the adjustment device for light path of the measure system is designed and key structure dimension and assemble errors is studied.
其次，设计了测量系统的光路调节装置，并进行了主要结构尺寸和装配误差的分析，进而确定了系统的机械结构。 - The vacuum system that adjusts the interference light path was designed and built.
并设计制作了适用于该系统的密封干涉光路的真空系统。 - A should the notice question of using collimated lens in light path
光路中使用准直透镜时应注意的一个问题 - The optical elements of its out light path are changed and then it is equipped with a photoelectric detection system.
更换了光谱仪外光路元件，并加装了光电检测系统。 - The structure of the Light path transition module and unit module, and the interconnection board were designed.
对光路转换模块和单元模块以及该互连板的总体结构进行了分析和设计。 - The time-division measurement on SOP can be achieved through single light path by this method.
此方法可以由单一光路实现对光波偏振态分时检测。 - At last, discussed the light path and the circuit of the measurement system, especially the amplifier circuit.
最后，文章进行了测量系统的设计，对测量系统的光路部分、电路部分中的微信号放大电路进行了设计。 - The basic components and operation principle of infrared moisture meter, designing and assembling the light path and hardware circuit of the system are introduced in detail, the program is compiled and debugged.
介绍了红外水分仪的基本组成和工作原理。对系统的光路和硬件电路进行了详细的设计与装配，编写了系统软件程序，并进行调试。 - The system was equipped with line matrix CCD as sensing unit and improved on light path structure of sensor.
系统采用线阵CCD作为传感元件，对传感器的光路结构进行了改进。 - The paper describes the basic principles and concrete light path in details.
详细描述了基本原理和具体光路。 - To design the light path.
设计光路。 - The sensor design, structure theory, light path, theory analysis and experiment are introduced.
建立了一种新的生物量浓度测量方法，并对传感器的设计进行了研究，介绍了传感器的组成原理、光路、理论分析和相关实验。 - Research of light path control system of ring laser gyro
环形激光陀螺光路控制系统的研究 - With the imaging formula of the holographic lens, the principle of the light path adjustment is deduced.
首先由全息透镜（光栅）成像公式出发，推导出了该光路调节的基本原理。 - Complete design of the light path in the system.
完成系统光路的设计。 - The light path of welding tracking sensor is designed based on straight triangulation, and the parameter of light path is certified based on distinguish ability of the system and measuring range.
本文依据直射式三角法设计了焊缝跟踪传感器的光路，并根据系统的分辨率和测量范围确定了光路参数。 - The light path separation reduces the size of the data of the radiance transfer.
通过光路切分，我们有效减小了辐射传输的数据量。 - The experiment system about the PTD technique with step optical excitation is established, and the light path and signal acquisition part of the system are analyzed.
建立了阶跃光激励的PTD技术的实验系统，并对系统的光路部分以及信号采集部分进行了分析。